Saddle width
156mm
±15mm
Based on: height, weight and hip circumference; average riding position
Free calculator · 2 steps · no account needed
Start with your body measurements. Measuring your sit bones gives a narrower range.
Measure horizontally around the widest part of your hips.
Sit on corrugated cardboard. Measure between the centres of the two impressions.
Example with Height 190 cm, Weight 94 kg, & Hip circumference 100 cm · slide to your values
156mm
±15mm
Based on: height, weight and hip circumference; average riding position
The range is an initial model estimate, still to be tested in practice.
Paid: report and step planFree account
Your current range is ±15 mm. Save your sit-bone measurement so you need not measure again for a new saddle.
Save my sit-bone measurementWe carry over what you enter here.
Your entered details are only remembered for this browser session.
Next calculator
Your entered values carry over. Only add what is still missing.
Go to Full bike fitPayment does not narrow your range. That takes additional measurements.
Start with your sit-bone width and riding posture. The calculator gives a starting width and a range to test on your bike.
The calculator uses your measured sit-bone width or estimates it from height, weight and hip circumference. Posture and riding type adjust the support width. The tool then selects a practical width range.
This is a starting point for comparing saddles, not a comfort guarantee. Shape, cutout, tilt and position also matter. Body measurements are not a direct sit-bone measurement.
An example with fixed inputs. Use the calculator for your own details.
Why this builds trust
The tool deliberately uses width ranges, clear assumptions, and an explicit confidence score.
The recommendation starts from sit-bone width because that is the strongest anatomical predictor. Riding posture and bike category refine it from there.
If you have a direct sit-bone measurement, use it. If not, the body-data estimate gives a useful starting range, with clearly lower confidence.
Saddle comfort also depends on shape, nose type, and tilt. The dashboard version combines all of these into a complete recommendation.
Short answers to the key measuring and interpretation questions.
Place corrugated cardboard or kitchen foil on a hard chair. Sit normally for 30 seconds, stand up carefully, and measure the center-to-center distance between the two deepest indentations.
Width matters, but tilt and setback are often equally important. A nose-down tilt concentrates pressure centrally even on a correctly sized saddle. If your current saddle width is near the recommendation but you still have numbness, check tilt first.
More aggressive positions rotate the pelvis forward, which shifts where the sit bones contact the saddle. An upright rider typically needs more rear support than a race rider with the same sit-bone measurement.
Explore more
Keep going with related guides and calculators that build on what you just learned.