Tire pressure · your starting point
More grip, less resistance
Example values are filled in. Adjust them for your bike and the ride ahead.
You and your bike
Bike type
example
Your tires and ride
example
example
Rim type · optional
For your bike profile. This pressure calculation does not use your rim type yet.
Tube type
Surface
What we do not include yet
This basic calculation does not include internal rim width, casing construction or wet conditions. Use your account for a more detailed setup.
Example with 75 kg & 28 mm · slide to your values
Example starting pressure
Front tyre
Rear tyre
Front: 5.2 bar; Rear: 5.6 bar
Uncertainty has not been quantified for this pressure calculation. No 95% range is available.
Paid: report and step planFree account
Save your tyres and pressure with your bike for your next ride.
Save with my bikeWe carry over what you enter here.
Your entered details are only remembered for this browser session.
Next calculator
Gearing
Your entered values carry over. Only add what is still missing.
Go to GearingWhat does this range mean?
These front and rear pressures are calculated starting points, not safety limits. Check your tire and rim limits, then test small changes of 0.1 bar for grip and comfort.
- Now
- Your current calculation
- Free account
- Save and reuse your own inputs
Payment does not narrow your range. That takes additional measurements.
Warnings
Always check the maximum pressure marked on your tire and rim, especially with hookless rims. Never exceed the lower of those limits.
The short answer
For the road bike in this example, the basic calculator recommends 5.2 bar front and 5.6 bar rear. Use this as a starting point and always check tyre and rim limits.
What this cannot tell you
Weight distribution is an assumption, not a measurement of your bike. The basic calculation does not know your rim limit or tyre casing. Check the permitted tyre and rim combination, especially with hookless rims, before setting pressure.
How do we calculate this?
How we calculate
The basic calculator distributes rider and bike weight 40% to the front wheel and 60% to the rear. Tyre width, discipline, surface, tyre type and riding goal adjust the pressure recommendation.
Worked example
An example with fixed inputs. Use the calculator for your own details.
Input
- Rider weight
- 75 kg
- Bike weight
- 8 kg
- Front / rear tyre width
- 28 / 28 mm
- Discipline
- Road
- Tyre type
- Tubeless
- Surface
- Average asphalt
- Riding goal
- Balance
- Assumed weight distribution
- 40% front / 60% rear
Calculated result
- Front pressure
- 5.2 bar
- Rear pressure
- 5.6 bar
Common mistakes
- Using only the sidewall size when the measured tyre width differs.
- Confusing bar and psi.
- Following a recommendation without checking tyre and rim pressure limits.
Frequently asked questions
Frequently asked questions
Short answers to the main questions about public pressure guidance.
How accurate is this calculator?
It gives a strong starting point based on weight, tyre width, surface, and tyre type. Always verify tyre and rim pressure limits afterward.
Why is front pressure lower than rear?
Most bikes carry more system weight on the rear wheel, so the recommended rear pressure is usually higher.
Can I save this recommendation?
Yes. Inside the dashboard you can save pressure recommendations per bike, wheelset, tyre setup, and riding goal.
Related tools and guides
Explore more
Related tools and guides
Keep going with related guides and calculators that build on what you just learned.