Free calculator · 2 steps · no account needed

What does your FTP mean on the bike?

Enter your test power. With your weight we calculate watts per kilogram.

1. Your test

Test method
example
Test power
290 W

2. Your weight

Not entered yet
example
Your weight
75 kg
Not entered yet
What we do not include yet
The conversion from a test to FTP differs between people. Ramp tests can overestimate sprinters and underestimate endurance riders, so the range is wider.

Example with Test power 290 W & Your weight 75 kg · slide to your values

FTP

275.5W

±16.5W

Based on: 20-minute test × 0.95

Enter your weight to see your watts per kilogram.

Paid: report and step plan

Free account

Save your FTP so the climb planner and gearing calculator can use it.

Save my FTP

We carry over what you enter here.

Your entered details are only remembered for this browser session.

Next calculator

Fuel and hydration

Your entered values carry over. Only add what is still missing.

Go to Fuel and hydration
What does this range mean?
The bar shows uncertainty in the result from your inputs and the model. These ranges are initial estimates that still need calibration. Better data can narrow the range.
Now
Your current calculation
Free account
Save and reuse your own inputs
Paid
Full fit report and adjustment order
Single fit €13.50 · or €21.50 per year
See what paid adds

Payment does not narrow your range. That takes additional measurements.

An FTP test is strenuous. Stop if you experience pain, dizziness or unusual breathlessness.

The short answer

W/kg is your FTP divided by your body weight. Enter a known FTP or estimate it from a test.

Read more

Use the same test method when comparing results.

How do we calculate this?

How we calculate

For a known FTP, the calculator uses that power directly. For a test, it applies the fixed factor for the selected method. It then divides the result by your weight.

What this cannot tell you

A test factor is an estimate and does not fit every rider. W/kg does not describe all of your endurance, technique or speed. Different test methods are not interchangeable measurements.

Worked example

An example with fixed inputs. Use the calculator for your own details.

Input

Test method
20-minute test
Average test power
250 W
Rider weight
75 kg

Calculated result

FTP
237.5 W
Power per kilogram
3.17 W/kg

Common mistakes

  • Adding bike weight to body weight when calculating W/kg.
  • Entering a short power peak instead of average test power.
  • Presenting a test estimate as a measured FTP.
A practical way to read threshold power

What this tool is for

A practical way to read threshold power

FTP is useful, but only if you understand what it can and cannot tell you. This page turns that number into a safer first-pass context for training and climbing.

Compare power in context

W/kg matters most when gradient and body mass shape the outcome. That makes climbs and event pacing easier to interpret.

Keep the assumptions visible

A threshold number is only as good as the test behind it. This page keeps the limits clear so riders do not overread the result.

Connect training and pacing

The value of FTP is not just a label. It helps you decide how hard to start, hold, and finish a climb or event.

Common problems riders try to solve

Common problems riders try to solve

Unsure whether a threshold number actually matches the climbing or pacing goal in front of them.

Comparing riders by raw watts without accounting for body mass and terrain.

Starting climbs too hard because pacing was never tied back to a realistic threshold baseline.

What to check first

What to check first

Check how FTP was tested before you trust the number.

Use body mass and terrain together instead of treating watts as a full answer.

Ask whether the goal is training context, climb pacing, or an event-specific strategy.

What not to change blindly

What not to change blindly

Do not assume a higher FTP always means better pacing or climbing performance.

Do not treat W/kg as a full story without considering aerodynamics, course profile, and fatigue.

Do not copy a pacing plan from a different rider profile without testing it yourself.

FAQ

FAQ

FAQ

Is FTP the same as race power?

Not exactly. FTP is a useful threshold reference, but race execution also depends on duration, terrain, and how well you pace fatigue.

Why does W/kg matter more on climbs than on flats?

Because gravity dominates uphill. On flatter roads, aerodynamics and speed management matter more than threshold alone.

Related guides

Explore more

Related guides

Keep going with related guides and calculators that build on what you just learned.